Español
Account Login:
Virtual Number:
Password:
| Remember me.
VoIP Provider, Home Phone Service – How VoIP Works InPhonex is a VoIP Provider – Sign Up!
Portuguκs InPhonex Personal Espanol
Welcome
Common Topics
Device Configuration
Knowledgebase
Glossary
Contact Us
Troubleshooting
Equipment

Configuration Options (Sipura 2000 / 2002)


Problem:

Configuration Options



Solution:

  1. How can I determine the IP address of my adapter? Dial **** at the voice prompt dial 110#
  2. My IP address is 0.0.0.0 why? Your adapter is configured for DHCP and it cannot find it in your network.
  3. How can I check if DHCP is enabled in my device? Dial **** at the voice prompt dial 100#
  4. I want to configure my ip address manually, how can I do this? Dial **** at the voice prompt dial 111# enter the IP address in the following format using your own IP address 192*168*001*002#. To check you entered the correct IP dial **** then 110#. You will also need to configure the subnet mask. Dial **** then 121# enter subnet mask in the following format: 255*255*255*0# to check your subnet mask enter 120#.
  5. Where can I find the online configuration guide for my SIP device? http://www.inphonex.com/support/phone-configuration-guides-type.php
  6. What is the bandwidth requirement for my adapter? Bandwidth usage depends on the audio codec being used. For best voice quality, the audio codec should be G711 (by default). The estimated bandwidth requirement is shown below for 1 channel usage G711 ~ 64Kbps (can be 90Kbps with overhead), G729 ~ 24Kbps.
  7. Why does my adapter ring periodically? This means that you have a voice mail. By default the adapter rings periodically to indicate that you have a voice mail. If you want to turn this off, go to the user setting and set "VMWI Ring Splash len" to 0.
  8. I lost my password. How can I reset my adapter? You can reset your adapter to factory default values by unplugging your Ethernet cable, access voice menu (****) and press 73738# login with "user" when accessing to http:/ip-address, and login with "admin" when accessing http://ip-address/admin/. Please note that resetting your unit will erase all the configuration settings.
  9. I cannot access the voice menu after pressing **** What do I do? Please unplug your ethernet cable, and try accessing the IVR again. If this works, then it means that there is a mis-configuration on your network setting. Perhaps your gateway IP address or DNS is wrong/unreachable; Please check.


______________________
Views: 17495
User Rating: 
1.5 / 5.0 (11 votes)


Our Home Phone Service includes Internet phones with free Internet calling and unlimited US and Canada plans. We offer prepaid phone service and International DID numbers using our voice over IP system and an analog telephone adaptor (ATA). The solutions are designed for home phone service, business phone service, call shops, telemarketing firms and cyber cafes. InPhonex is proud to support Internet telephony equipment (IP Phones) including Sipura 2000, Sipura 3000, Cisco 186, Linksys PAP2 and other SIP phone adaptors. We also support Asterisk PBX, Trixbox and offer turn-key VoIP Reseller business opportunities to let entrepreneurs and businesses resell voice over Internet (VoIP) under their brand name.

Copyright © InPhonex